Products

Ozone Generator 500mg/H, JB-T500MG

INQUIRY
Description

Specifications: 

Input voltage: AC220V 50/60Hz 

Ozone density: 300mg/H

Power Size: 80x53x30 mm
Ozone Tube Size: φ28x107 mm
 

Feature:

  • Eliminates odors
  • Freshens stale air
  • Destroys airborne microbes
  • Drinking water purification
  • Safe, quiet and energy efficient
  • Easy to maintain
  • Patent pending

 

Application:

  • Disinfection cabinet, wardrobe, dryer, refrigerator, incubator, toilet.
  • Medical equipment, air purifier, beauty equipment, car, air conditioning, ventilation, air curtain machine

 

Precaution:
1. Cooling method: Air cooling for transformer and ceramic plate. 

2. When ozone generators work, it is necessary to have cooling fans to blow the ceramic plates and ozone power supplies. When installing the power supply, please make sure there is 2-3cm high space between its bottom and the fixed board, so that heat on the bottom of the power supply can be radiated quickly. 

3. This is a high voltage product. Do not touch it when it is working. 

4. Usually after ozone sterilization, it needs 20-30 minutes to diffuse ozone before anyone enters. And only when the ozone concentration is or below 0.15ppm, it is permitted to enter. 

5. The ozone output test data is based on 95% pure oxygen feeding and dew point -45°. Different temperature and humidity in the environment will affect the ozone output and concentration. 

6. This item can work continuously for 20~30 minutes with air cooling. If it continues to work without any rest, the ozone output will decrease by degrees because ceramic plates are overheated.
7. When two high voltage wires are very close to each other, especially under moist circumstances or they touch, the wires will make a light and possibly lead that the insulation becomes discoloured even melts. The way to avoid this matter is to keep the two high voltage wires parallel or separate, at least untouched. 

8. Usually when ozone generator is used for test, it will be better if the interval time between two tests is one mintue. It is because the output voltage and start-up electric current is very very high, if it is started up and closed down frequently within several minutes, power supply is possible to be burned due to instant or instantaneous high current. 

9. Deoxidized materials or objects should not be contacted with ozone for a long time in order not to cause damage or corrosion, such as rubber, iron, and copper and so on. The corrosion will accelerate when iron, copper pieces without coating are in the moist.

管式臭氧发生器_10
管式臭氧发生器_11